IDW '18 Exhibitor

(as of October 31, 2018)

Companies

Altech CO., LTD.

Fraunhofer Institute for Organic Electronics. Electron Beam and Plasma Technology FEP

HIOKI E.E. CORPORATION

IDTechEx

MATSUBO Corporation

Nagase ChemteX Corporation

OPTCERAMICS LIMITED / Computational Reality Lab., Hosei Univ.

Opto Design Inc.

OXIDE Corporation

SHINTECH, INC.

Silvaco Japan Co., Ltd.

TOPCON TECHNOHOUSE CORPORATION

Toray Research Center, Inc.

Tosoh Corporation

TOYO Corporation

VITEC GLOBAL ELECTRONICS CO., LTD

Wexx Co., Ltd.

YUASA SYSTEM Co., Ltd.

Companies - Tokai Zone

PaPaLaB Co., Ltd.

Pico-Device Co., Ltd.

SiC Tools LLC

Universities

Aichi Univ.of Technology

Electron Device Engineering Labs., Univ. of Toyama

Mutsu Lab., Ryukoku Univ.

D1 Lab., Tokushima Univ.

Fujieda Lab., Ritsumeikan Univ.

Univ. of the Ryukyus

Maeda Lab., Tokai Univ.

Liquid Crystal Device Lab., Nagaoka Univ. of Tech.

Yamamoto Lab., Utsunomiya Univ.

EXHIBITION CONTENTS

Fraunhofer Institute for Organic Electronics. Electron Beam and Plasma Technology FEP

Flexible Organic Electronics, OLED-Microdisplays and Sensors, Surface Technologies
Fraunhofer FEP is located in Dresden/Germany and focuses on developing innovative solutions, technologies and processes for surface modification and organic electronics. Our institute offers a broad range of R&D and pilot manufacturing opportunities, especially for the treatment, structuring and finishing of surfaces as well as for OLED microdisplays, organic and inorganic sensors, optical filters and flexible OLED lighting. At IDW '18 we present latest ultra-low-power OLED microdisplays for wearables with a novel concept for an extremely low power consumption and simplified driving electronics. Furthermore we will exhibit various other OLED microdisplays for AR and VR such as a new generation of large-area OLED microdisplays with a resolution of extended full HD 1920 x 1200 pixels, framerates of 120 fps and a screen diagonal of 1". Additionally we will present latest results in flexible organic electronics with various flexible OLED lighting demonstrators and about coatings of flexible products like ultra-thin glass and for permeation barrier films.

HIOKI E.E. CORPORATION

The Hioki RGB Laser Meter TM6102, RGB Laser Luminance Meter TM6103 and Optical Power Meter TM6104 will be on exhibit. The meters deliver many important features in the pursuit of accurate laser measurement, including a modulated light function and advanced calibration technology. The commonly-used tristimulus-value-direct-reading method cannot measure the chromaticity and photometric quantity of laser displays because the spectral sensitivity of XYZ filters do not provide sufficient accuracy. Our RGB laser measuring instruments use a different measurement principle characterized by separating the three colors into a single color, measuring the centroid wavelength and power of each laser and then calculating the photometric quantity and chromaticity. Furthermore, their white balance navigation function saves the effort of white balance adjustment work.

IDTechEx

IDTechEx Research Report - Emerging technologies
Reports assess a particular technology, market vertical or territory. They appraise the market opportunity with detailed forecasts and assess the technologies, competitive landscape,value chain drivers, barriers, case studies and global trends. All report purchases include up to 30 minutes telephone time with an expert analyst. IDTechEx provides independent market research and business intelligence to companies across the value chain, supporting them in making essential strategic decisions.
1) Global OLED Display Forecasts and Technologies 2019-2029:
The Rise of Flexible and Foldable Displays
Technology analysis and detailed forecasts by market segment and display type; with additional assessment of Quantum Dot Displays, E-Paper Displays and other Flexible Displays
2) Quantum Dot Materials and Technologies 2018-2028:Trends, Markets,Players
Materials, players and applications such as displays (edge optic, QD enhancement film, color filter, on-chip, emissive),lighting, visible & IR/NIR image sensor,photovoltaics, etc.

Nagase ChemteX Corporation

Denatorn is a conductive coating material mainly composed of PEDOT / PSS, that can provide a coating with high conductivity and high transparency.
Denatron Typ-C is a conductive coating expected to be used in applications where durability is required with CNT as a main raw material.

OPTCERAMICS LIMITED / Computational Reality Lab., Hosei Univ.

“Aerial imaging display with long focal distance by a retroreflective mirror array (Oz panel)” We have developed a retroreflective optical device (Oz panel) for realizing an aerial imaging display with a long protruding distance. The Oz panel has particular features with retroreflection in the horizontal direction and reflection in the vertical direction. Thus, the Oz panel can easily realize aerial images of real objects or 2D / 3D display images. We have developed an Oz panel with 2-meter protruding distance and demonstrate an aerial imaging display using it. We can also project images on the Oz panel with a projector, and you’ll experience a demonstration that combines an aerial image, real objects, and a video background. Please experience aerial imaging that jump out over long distances on a big screen. Our technology will be widely available for signages, guide boards, AR/MR,interaction technologies. We will also present technical details at 3Dp2-7L.

Opto Design Inc.

Introduction to direct-lit LED backlight suitable for local dimming
Our UniBriteR technology is able to immediately convert point light sources into surface light sources at close proximities. This technology is staring to be adopted for use in the backlight for televisions and automobile dashboards. Its special feature is that the technology enables the direct-lit LED backlight to be as thin as possible without shortening the pitch between diodes. Moreover, by positioning a combination of UniBrite and an optical sheet directly over LED it is possible to control the spread of light when a single LED is switched on without any drop in luminance, which in turn makes it easier to control liquid crystals when expressing contrast. This greatly reduces the number of LED required through the use of liquid crystals, enabling the realization of contrast and making the technology the one and only OLED counter method.

OXIDE Corporation

Speckle noise may seriously degrade the image quality of laser displays. Accurate speckle noise measurement is the first step in developing speckle reduction products. As speckle is the random laser interference pattern formed on the human eye retina, there is a need for devices that can simulate the human eye. Our speckle contrast measurement device, Dr. SPECKLE, is the only measurement system fully compliant with the international standard IEC 62906-5-2, and is highly evaluated as a quantitative measurement index of speckle noise. It was the first system to meet the latest measurement methods pursuant to the international standard IEC 62906-5-4 (measuring methods of color speckle) issued in January 2018. We will also be introducing an option that enables speckle measurements of white screens.

SHINTECH, INC.

LCD Master is a comprehensive software for research and development of liquid crystal lenses and DOE and HOE using liquid crystals. The ray tracing software RAYs, RCWA for calculation of periodic structures, FDTD for complex structures, and optical calculations (2x2, 4x4) for propagating laminated structures ? all of these calculation solvers support anisotropy. Furthermore, as the interface that integrates them can be controlled using the Java language, it is possible to execute them in the user’s own system and further optimize the calculations. We provide a system that handles a wide range of sizes from nano to centimeter order at the same time.It is ideal for liquid crystal lens, VR/AR, and holographic development. Optipro-MCS is a device capable of measuring retardation such as Re and Rth in a range of 0 to 14,000 nm, and transmittance, luminance, chromaticity and polarization. These parameters can be measured at high speed.

Silvaco Japan Co., Ltd.

TCAD Device Simulator Atlas / Victory Software Solution for developing display device

TOPCON TECHNOHOUSE CORPORATION

To satisfy demand for color gamut and contrast expanding, OLED and µLED will become mainstream. But luminance and chromaticity uniformity and Mura are inevitable phenomenon for self-emitting RGB. Our world first absolute 2D spectroradiometer SR-5000 is the perfect tool for Mura analysis and material development for OLED and µLED. Also SR-5000M is designed especially for sub-pixel inspection. This model with microscope enables to fulfill even 2µm level sub-pixel Mura analysis as micro spectroscopy. Demonstrate the tool detail with sample in our exhibition booth.

Toray Research Center, Inc.

Toray Research Center, Inc. (TRC) provides an extensive range of high quality material analysis services. We analyze and report on the chemical compositions, material properties and qualities of the samples we receive from our clients. TRC's superior ability to meet problem-solving requirements of clients is based on 40 years of experience in analysis and materials characterization. TRC serves the world's top R&D and manufacturing companies in a variety of industrial fields including OLED, LCD, TFT, etc. Making full use of our variety of analytical techniques developed through actual work, we provide you with high performance analysis service. Learn how our benchmarking and degradation material analysis can work for you.

Tosoh Corporation

Novel Transparent Conductive Oxide Sputtering Target

TOYO Corporation

The LT1000 is an ion impurity analyzer that detects both organic and inorganic ion impurity with extremely high sensitivity. It can detect even the most minute (in the parts per trillion (ppt) range) of ion concentrations in a substance. With more sensitivity and greater accuracy, there is less concern about getting a sub-optimal reading and more focus on achieving the optimal result. The high resolution and accuracy provide an ability for lab engineers and technicians to detect impurities in test materials that is unmatched in the industry.
Compared with other products in a similar class, the LT1000 can perform and complete a full test cycle in a second compared to conventional ion chromatography methods, which can take upwards of one hour. This is more than 3,600 times faster, allowing for a substantially larger number of tests to be performed over a given period of time. This accelerates lab analysis and helps shorten project development lead times.

VITEC GLOBAL ELECTRONICS CO., LTD

The EZContrast viewing angle measurement system
The EZContrast Series enables measurements of viewing angle luminance and color data. This system can make accurate color measurements for any type of stimulus.

Wexx Co., Ltd.

Wexx Co., Ltd. will exhibit the following product.
Vacuum Particle Sensor
Useful for improving yield, quality, and maintenance of the vacuum film forming process. In-situ measurement, vacuum particle sensor.
1.Insertion into process chamber or exhaust line
2.Installation in the chamber
There are two types, and you can measure particles in real time. By monitoring the particle generation status, you can use it to combat particles that affect yield and quality.
We will exhibit the exhaust line insertion measurement display, so please feel welcome to come and have a look at the venue.

YUASA SYSTEM Co., Ltd.

YUASA SYSTEM Company Ltd, is an award winning provider of multi-purpose endurance testing machines and systems for flexible displays, OLED devices, flexible substrates, flat cables and films for smartphones, tablets, wearables, automobiles and healthcare. A wide variety of emerging global standard endurance tests (bending, twisting, folding, rolling-up and, pushing) are interchanged and performed on desktop units in an environmental chamber. We will introduce our newest product, the Clamshell bending test system, at this show. This tester adopt the Tension-Free method, enabling highly accurate tests without unnecessary tension. Moreover, we provide some external control packages, that will make your tests more useful and profitable. For more info, go to: http://www.yuasa-system.jp/en We are a proud member of SEMI and SID, and have offices in Okayama,Tokyo,Osaka,San Francisco,as well as worldwide agents.

Fraunhofer Institute for Organic Electronics. Electron Beam and Plasma Technology FEP
Flexible Organic Electronics, OLED-Microdisplays and Sensors, Surface Technologies Fraunhofer FEP is located in Dresden/Germany and focuses on developing innovative solutions, technologies and processes for surface modification and organic electronics. Our institute offers a broad range of R&D and pilot manufacturing opportunities, especially for the treatment, structuring and finishing of surfaces as well as for OLED microdisplays, organic and inorganic sensors, optical filters and flexible OLED lighting. At IDW '18 we present latest ultra-low-power OLED microdisplays for wearables with a novel concept for an extremely low power consumption and simplified driving electronics. Furthermore we will exhibit various other OLED microdisplays for AR and VR such as a new generation of large-area OLED microdisplays with a resolution of extended full HD 1920 x 1200 pixels, framerates of 120 fps and a screen diagonal of 1". Additionally we will present latest results in flexible organic electronics with various flexible OLED lighting demonstrators and about coatings of flexible products like ultra-thin glass and for permeation barrier films.

HIOKI E.E. CORPORATION
The Hioki RGB Laser Meter TM6102, RGB Laser Luminance Meter TM6103 and Optical Power Meter TM6104 will be on exhibit. The meters deliver many important features in the pursuit of accurate laser measurement, including a modulated light function and advanced calibration technology. The commonly-used tristimulus-value-direct-reading method cannot measure the chromaticity and photometric quantity of laser displays because the spectral sensitivity of XYZ filters do not provide sufficient accuracy. Our RGB laser measuring instruments use a different measurement principle characterized by separating the three colors into a single color, measuring the centroid wavelength and power of each laser and then calculating the photometric quantity and chromaticity. Furthermore, their white balance navigation function saves the effort of white balance adjustment work.

IDTechEx
IDTechEx Research Report - Emerging technologies Reports assess a particular technology, market vertical or territory. They appraise the market opportunity with detailed forecasts and assess the technologies, competitive landscape,value chain drivers, barriers, case studies and global trends. All report purchases include up to 30 minutes telephone time with an expert analyst. IDTechEx provides independent market research and business intelligence to companies across the value chain, supporting them in making essential strategic decisions. 1) Global OLED Display Forecasts and Technologies 2019-2029: The Rise of Flexible and Foldable Displays Technology analysis and detailed forecasts by market segment and display type; with additional assessment of Quantum Dot Displays, E-Paper Displays and other Flexible Displays 2) Quantum Dot Materials and Technologies 2018-2028:Trends, Markets,Players Materials, players and applications such as displays (edge optic, QD enhancement film, color filter, on-chip, emissive),lighting, visible & IR/NIR image sensor,photovoltaics, etc.

Nagase ChemteX Corporation
Denatorn is a conductive coating material mainly composed of PEDOT / PSS, that can provide a coating with high conductivity and high transparency. Denatron Typ-C is a conductive coating expected to be used in applications where durability is required with CNT as a main raw material.

OPTCERAMICS LIMITED / Computational Reality Lab., Hosei Univ.
“Aerial imaging display with long focal distance by a retroreflective mirror array (Oz panel)” We have developed a retroreflective optical device (Oz panel) for realizing an aerial imaging display with a long protruding distance. The Oz panel has particular features with retroreflection in the horizontal direction and reflection in the vertical direction. Thus, the Oz panel can easily realize aerial images of real objects or 2D / 3D display images. We have developed an Oz panel with 2-meter protruding distance and demonstrate an aerial imaging display using it. We can also project images on the Oz panel with a projector, and you’ll experience a demonstration that combines an aerial image, real objects, and a video background. Please experience aerial imaging that jump out over long distances on a big screen. Our technology will be widely available for signages, guide boards, AR/MR,interaction technologies. We will also present technical details at 3Dp2-7L.

Opto Design Inc.
Introduction to direct-lit LED backlight suitable for local dimming Our UniBriteR technology is able to immediately convert point light sources into surface light sources at close proximities. This technology is staring to be adopted for use in the backlight for televisions and automobile dashboards. Its special feature is that the technology enables the direct-lit LED backlight to be as thin as possible without shortening the pitch between diodes. Moreover, by positioning a combination of UniBrite and an optical sheet directly over LED it is possible to control the spread of light when a single LED is switched on without any drop in luminance, which in turn makes it easier to control liquid crystals when expressing contrast. This greatly reduces the number of LED required through the use of liquid crystals, enabling the realization of contrast and making the technology the one and only OLED counter method.

OXIDE Corporation
Speckle noise may seriously degrade the image quality of laser displays. Accurate speckle noise measurement is the first step in developing speckle reduction products. As speckle is the random laser interference pattern formed on the human eye retina, there is a need for devices that can simulate the human eye. Our speckle contrast measurement device, Dr. SPECKLE, is the only measurement system fully compliant with the international standard IEC 62906-5-2, and is highly evaluated as a quantitative measurement index of speckle noise. It was the first system to meet the latest measurement methods pursuant to the international standard IEC 62906-5-4 (measuring methods of color speckle) issued in January 2018. We will also be introducing an option that enables speckle measurements of white screens.

SHINTECH, INC.
LCD Master is a comprehensive software for research and development of liquid crystal lenses and DOE and HOE using liquid crystals. The ray tracing software RAYs, RCWA for calculation of periodic structures, FDTD for complex structures, and optical calculations (2x2, 4x4) for propagating laminated structures ? all of these calculation solvers support anisotropy. Furthermore, as the interface that integrates them can be controlled using the Java language, it is possible to execute them in the user’s own system and further optimize the calculations. We provide a system that handles a wide range of sizes from nano to centimeter order at the same time.It is ideal for liquid crystal lens, VR/AR, and holographic development. Optipro-MCS is a device capable of measuring retardation such as Re and Rth in a range of 0 to 14,000 nm, and transmittance, luminance, chromaticity and polarization. These parameters can be measured at high speed.

Silvaco Japan Co., Ltd.
TCAD Device Simulator Atlas / Victory Software Solution for developing display device

TOPCON TECHNOHOUSE CORPORATION
To satisfy demand for color gamut and contrast expanding, OLED and µLED will become mainstream. But luminance and chromaticity uniformity and Mura are inevitable phenomenon for self-emitting RGB. Our world first absolute 2D spectroradiometer SR-5000 is the perfect tool for Mura analysis and material development for OLED and µLED. Also SR-5000M is designed especially for sub-pixel inspection. This model with microscope enables to fulfill even 2µm level sub-pixel Mura analysis as micro spectroscopy. Demonstrate the tool detail with sample in our exhibition booth.

Toray Research Center, Inc.
Toray Research Center, Inc. (TRC) provides an extensive range of high quality material analysis services. We analyze and report on the chemical compositions, material properties and qualities of the samples we receive from our clients. TRC's superior ability to meet problem-solving requirements of clients is based on 40 years of experience in analysis and materials characterization. TRC serves the world's top R&D and manufacturing companies in a variety of industrial fields including OLED, LCD, TFT, etc. Making full use of our variety of analytical techniques developed through actual work, we provide you with high performance analysis service. Learn how our benchmarking and degradation material analysis can work for you.

Tosoh Corporation
Novel Transparent Conductive Oxide Sputtering Target

TOYO Corporation
The LT1000 is an ion impurity analyzer that detects both organic and inorganic ion impurity with extremely high sensitivity. It can detect even the most minute (in the parts per trillion (ppt) range) of ion concentrations in a substance. With more sensitivity and greater accuracy, there is less concern about getting a sub-optimal reading and more focus on achieving the optimal result. The high resolution and accuracy provide an ability for lab engineers and technicians to detect impurities in test materials that is unmatched in the industry. Compared with other products in a similar class, the LT1000 can perform and complete a full test cycle in a second compared to conventional ion chromatography methods, which can take upwards of one hour. This is more than 3,600 times faster, allowing for a substantially larger number of tests to be performed over a given period of time. This accelerates lab analysis and helps shorten project development lead times.

VITEC GLOBAL ELECTRONICS CO., LTD
The EZContrast viewing angle measurement system The EZContrast Series enables measurements of viewing angle luminance and color data. This system can make accurate color measurements for any type of stimulus.

Wexx Co., Ltd.
Wexx Co., Ltd. will exhibit the following product. Vacuum Particle Sensor Useful for improving yield, quality, and maintenance of the vacuum film forming process. In-situ measurement, vacuum particle sensor. 1.Insertion into process chamber or exhaust line 2.Installation in the chamber There are two types, and you can measure particles in real time. By monitoring the particle generation status, you can use it to combat particles that affect yield and quality. We will exhibit the exhaust line insertion measurement display, so please feel welcome to come and have a look at the venue.

YUASA SYSTEM Co., Ltd.
YUASA SYSTEM Company Ltd, is an award winning provider of multi-purpose endurance testing machines and systems for flexible displays, OLED devices, flexible substrates, flat cables and films for smartphones, tablets, wearables, automobiles and healthcare. A wide variety of emerging global standard endurance tests (bending, twisting, folding, rolling-up and, pushing) are interchanged and performed on desktop units in an environmental chamber. We will introduce our newest product, the Clamshell bending test system, at this show. This tester adopt the Tension-Free method, enabling highly accurate tests without unnecessary tension. Moreover, we provide some external control packages, that will make your tests more useful and profitable. For more info, go to: http://www.yuasa-system.jp/en We are a proud member of SEMI and SID, and have offices in Okayama,Tokyo,Osaka,San Francisco,as well as worldwide agents.